Zu Hause > Car Audio > Speakers > Mille Speakers > ML 700.3 LEGEND

ML 700.3 LEGEND 70 (3) mm (in.) | Mid-range | 100 W | 4 Ohm

Das MLK 700.3 Legend Zwei-Wege-System zielt darauf ab, einen exzellenten mittleren bis hohen Frequenzbereich zu bieten, um entweder mit einem ML 1650.3 oder ML 1800.3 Legend Woofer aktiv gefiltert in einem Multiverstärkersystem kombiniert zu werden. Das MLK 700.3 Legend ist aus dem ML 700.3 Legend erweiterten Mitteltöner, dem ML 280.3 Legend Hochtöner und der ausgewählten MLCX 2 TM.3 Frequenzweiche, welche den einzigartigen Mittelkontur Regler mit 3 Positionswahlschalter bietet, wodurch bei den mittleren Frequenzen des ML 700.3 Legend Mitteltöner der Kreuzungspunkt mit dem Hochtöner variiert werden kann um den gewünschten Klang zu erhalten, zusammengestellt.
Component Mid-range
Size mm (in.) 70 (3)
Power Handling - Peak W 100
Power Handling - Peak Note (Hi-Pass filtered @ 250Hz - 12dB Oct.)
Impedance Ohm 4
Voice Coil Ø 20 (0.8)
Frequency Response Hz 200 - 20k
Magnet size D x d x h mm (in.) 45 x 25 x 3,5 (1.77 x 0.98 x 0.13)
Weight of one speaker kg (lb.) 0,21 (0.46)
Magnet Neodymium
Cone Pressed-pulp cone with cotton fibres
Technische Daten
D mm 65
Re Ohm 3,8
Fs Hz 110
Le mH 0,05
Vas I 1,1
Mms g 2,7
Cms mm/N 0,7
BL T*m 3,3
Qts 0,57
Qes 0,67
Qms 4
Spl dB 90
Elektro-Akustische Spezifikationen
Physikalische Spezifikationen
ML 700.3 LEGEND
A 87,8 mm 3.45 in
B 74 mm 2.91 in
C 47 mm 1.85 in
D 41,3 mm 1.62 in
E 93 mm 3.66 in.
F 17 mm 0.67 in.
Frequenzgang
ML 700.3 LEGEND
Zubehör
ML 700.3 LEGEND
Grille
Included

Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.

Merkmale
ML 700.3 LEGEND

1. Neodymium magnet optimized with FEA simulations, for superior dynamics and control.
2. Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.
3. Extremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.
4. Exponential V-cone® with optimized geometry for utmost linearity and dispersion.
5. CONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.
6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.
7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.
8. Junction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.
9. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.
10. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.
11. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.